
Extraction of local feature descriptors is a vital stage in the solution
pipelines for numerous computer vision tasks. Learningbased approaches improve
performance in certain tasks, but still cannot replace handcrafted features in
general. In this paper, we improve the learning of local feature descriptors by
optimizing the performance of descriptor matching, which is a common stage that
follows descriptor extraction in local feature based pipelines, and can be
formulated as nearest neighbor retrieval. Specifically, we directly optimize a
rankingbased retrieval performance metric, Average Precision, using deep
neural networks. This generalpurpose solution can also be viewed as a listwise
learning to rank approach, which is advantageous compared to recent local
ranking approaches. On standard benchmarks, descriptors learned with our
formulation achieve stateoftheart results in patch verification, patch
retrieval, and image matching.

Metallic nanoparticles have been used as catalysts for various reactions, and
the huge literature on the subject is hard to overlook. In many applications,
the nanoparticles must be affixed to a colloidal carrier for easy handling
during catalysis. These "passive carriers" (e.g., dendrimers) serve for a
controlled synthesis of the nanoparticles and prevent coagulation during
catalysis. Recently, hybrids from nanoparticles and polymers have been
developed that allow us to change the catalytic activity of the nanoparticles
by external triggers. In particular, single nanoparticles embedded in a
thermosensitive network made from poly(Nisopropylacrylamide) (PNIPAM) have
become the moststudied examples of such hybrids: Immersed in cold water, the
PNIPAM network is hydrophilic and fully swollen. In this state, hydrophilic
substrates can diffuse easily through the network, and react at the surface of
the nanoparticles. Above the volume transition located at 32{\deg}C, the
network becomes hydrophobic and shrinks. Now hydrophobic substrates will
preferably diffuse through the network and react with other substrates in the
reaction catalyzed by the enclosed nanoparticle. Such "active carriers", may
thus be viewed as true nanoreactors that open new ways for the use of
nanoparticles in catalysis.

In this paper we show that deep convolutional neural networks (CNN) can
massively outperform traditional densely connected neural networks (both deep
or shallow) in predicting eigenvalue problems in mechanics. In this sense, we
strike out in a novel direction in mechanics computations with strongly
predictive neural networks whose success depends not only neural architectures
being deep but also being fundamentally different from neural architectures
which have been used in mechanics till now. To show this, we consider a model
problem: predicting the eigenvalues of a 1D phononic crystal, however, the
general observations pertaining to the predictive superiority of CNNs over MLPs
should extend to other problems in mechanics as well. In the present problem,
the optimal CNN architecture reaches $98\%$ accuracy level on unseen data when
trained with just 20,000 training samples. Fullyconnected multilayer
perceptrons (MLP)  the network of choice in mechanics research  on the other
hand, does not improve beyond $85\%$ accuracy even with $100,000$ training
samples. We also show that even with a relatively small amount of training
data, CNNs have the capability to generalize well for our problems and that
they automatically learn deep symmetry operations such as translational
invariance. Most importantly, however, we show how CNNs can naturally represent
mechanical material tensors and that the convolution operation of CNNs has the
ability to serve as local receptive fields which is a natural representation of
mechanical response. Strategies proposed here may be used for other problems of
mechanics and may, in the future, be used to completely sidestep certain
cumbersome algorithms with a purely data driven approach based upon deep
architectures of modern neural networks such as deep CNNs.

In this paper we consider the problem of avoided crossings (level repulsion)
in phononic crystals and suggest a computationally efficient strategy to
distinguish them from normal cross points. This process is essential for the
correct sorting of the phononic bands and, subsequently, for the accurate
determination of mode continuation, group velocities, and emergent properties
which depend on them such as thermal conductivity. Through explicit phononic
calculations using generalized Rayleigh quotient, we identify exact locations
of exceptional points in the complex wavenumber domain which results in level
repulsion in the real domain. We show that in the vicinity of the exceptional
point the relevant phononic eigenvalue surfaces resemble the surfaces of a 2 by
2 parameterdependent matrix. Along a closed loop encircling the exceptional
point we show that the phononic eigenvalues are exchanged, just as they are for
the 2 by 2 matrix case. However, the behavior of the associated eigenvectors is
shown to be more complex in the phononic case. Along a closed loop around an
exceptional point, we show that the eigenvectors can flip signs multiple times
unlike a 2 by 2 matrix where the flip of sign occurs only once. Finally, we
exploit these eigenvector sign flips around exceptional points to propose a
simple and efficient method of distinguishing them from normal crosses and of
correctly sorting the bandstructure. Our proposed method is roughly an
orderof magnitude faster than the zoomin method and correctly identifies >
97% of the cases considered. Both its speed and accuracy can be further
improved and we suggest some ways of achieving this. Our method is general and,
as such, would be directly applicable to other eigenvalue problems where the
eigenspectrum needs to be correctly sorted.

In this paper the salient features of the Plane Wave Expansion (PWE) method
and the mixed variational technique are combined for the fast eigenvalue
computations of arbitrarily complex phononic unit cells. This is done by
expanding the material properties in a Fourier expansion, as is the case with
PWE. The required matrix elements in the variational scheme are identified as
the discrete Fourier transform coefficients of material properties, thus
obviating the need for any explicit integration. The process allows us to
provide succinct and closed form expressions for all the matrices involved in
the mixed variational method. The scheme proposed here preserves both the
simplicity of expression which is inherent in the PWE method and the superior
convergence properties of the mixed variational scheme. We present numerical
results and comment upon the convergence and stability of the current method.
We show that the current representation renders the results of the method
stable over the entire range of the expansion terms as allowed by the spatial
discretization. When compared with a zero order numerical integration scheme,
the present method results in greater computational accuracy of all
eigenvalues. A higher order numerical integration scheme comes close to the
accuracy of the present method but only with significantly more computational
expense.

In this paper gradient based topology optimization (TO) is used to discover
3D phononic structures that exhibit ultrawide normalized allangle allmode
band gaps. The challenging computational task of repeated 3D phononic
bandstructure evaluations is accomplished by a combination of a fast mixed
variational eigenvalue solver and distributed Graphic Processing Unit (GPU)
parallel computations. The TO algorithm utilizes the material
distributionbased approach and a gradientbased optimizer. The design
sensitivity for the mixed variational eigenvalue problem is derived using the
adjoint method and is implemented through highly efficient vectorization
techniques. We present optimized results for twomaterial simple cubic (SC),
body centered cubic (BCC), and face centered cubic (FCC) crystal structures and
show that in each of these cases different initial designs converge to single
inclusion network topologies within their corresponding primitive cells. The
optimized results show that large phononic stop bands for bulk wave propagation
can be achieved at lower than close packed spherical configurations leading to
lighter unit cells. For tungsten carbide  epoxy crystals we identify all angle
all mode normalized stop bands exceeding 100%, which is larger than what is
possible with only spherical inclusions.

We report a facile and novel method for the fabrication of Cu2O@PNIPAM
coreshell nanoreactors using Cu2O nanocubes as the core. The PNIPAM shell not
only effectively protects the Cu2O nanocubes from oxidation, but also improves
the colloidal stability of the system. The Cu2O@PNIPAM coreshell microgels can
work efficiently as photocatalyst for the decomposition of methyl orange under
visible light. A significant enhancement in the catalytic activity has been
observed for the coreshell microgels compared with the pure Cu2O nanocubes.
Most importantly, the photocatalytic activity of the Cu2O nanocubes can be
further tuned by the thermosensitive PNIPAM shell, as rationalized by our
recent theory.

In a hybrid pumping alkali vapor cell that both K and Rb are filled, K atom
spins are optically pumped by laser and Rb atom spins are polarized by the K
spins through spin exchange. We find that the AC Stark shift of the Rb atoms is
composed of not only the AC Stark shift of the Rb atoms caused by the far off
resonant pumping laser which is tuned to the K absorption lines, but also the
AC Stark shift of the K atom spins. The mixing of the light shifts through fast
spin exchange between K and Rb atoms are studied in this paper and we
demonstrate a KRb21Ne comagnetometer in which the AC Stark shift of the Rb
atoms are reduced by the collision mixing.

Three fundamental variational principles used for solving elastodynamic
eigenvalue problems are studied within the context of elastic wave propagation
in periodic composites (phononics). We study the convergence of the eigenvalue
problems resulting from the displacement Rayleigh quotient, the stress Rayleigh
quotient and the mixed quotient. The convergence rates of the three quotients
are found to be related to the continuity and differentiability of the density
and compliance variation over the unit cell. In general, the mixed quotient
converges faster than both the displacement Rayleigh and the stress Rayleigh
quotients, however, there exist special cases where either the displacement
Rayleigh or the stress Rayleigh quotient shows the exact same convergence as
the mixedmethod. We show that all methods converge faster for smoother
material property variations, but when density variation is rough, the
difference between the mixed quotient and stress Rayleigh quotient is higher
and similarly, when compliance variation is rough, the difference between the
mixed quotient and displacement Rayleigh quotient is higher. Since eigenvalue
problems such as those considered in this paper tend to be highly
computationally intensive, it is expected that these results will lead to fast
and efficient algorithms in the areas of phononics and photonics.

Raman spectroscopy is the prime nondestructive characterization tool for
graphene and related layered materials. The shear (C) and layer breathing modes
(LBMs) are due to relative motions of the planes, either perpendicular or
parallel to their normal. This allows one to directly probe the interlayer
interactions in multilayer samples. Graphene and other twodimensional (2d)
crystals can be combined to form various hybrids and heterostructures, creating
materials on demand with properties determined by the interlayer interaction.
This is the case even for a single material, where multilayer stacks with
different relative orientation have different optical and electronic
properties. In twisted multilayer graphene samples there is a significant
enhancement of the C modes due to resonance with new optically allowed
electronic transitions, determined by the relative orientation of the layers.
Here we show that this applies also to the LBMs, that can be now directly
measured at room temperature. We find that twisting does not affect LBMs, quite
different from the case of the C modes. This implies that the periodicity
mismatch between two twisted layers mostly affects shear interactions. Our work
shows that Raman spectroscopy is an ideal tool to uncover the interface
coupling of 2d hybrids and heterostructures.

We investigate the nonequilibrium behavior of dense, plasticcrystalline
suspensions of mildly anisotropic colloidal hard dumbbells under the action of
an oscillatory shear field by employing Brownian dynamics computer simulations.
In particular, we extend previous investigations, where we uncovered novel
nonequilibrium phase transitions, to other aspect ratios and to a larger
nonequilibrium parameter space, that is, a wider range of strains and shear
frequencies. We compare and discuss selected results in the context of novel
scattering and rheological experiments. Both simulations and experiments
demonstrate that the previously found transitions from the plastic crystal
phase with increasing shear strain also occur at other aspect ratios. We
explore the transition behavior in the strainfrequency phase and summarize it
in a nonequilibrium phase diagram. Additionally, the experimental rheology
results hint at a slowing down of the colloidal dynamics with higher aspect
ratio.

This paper proposes an efficient content adaptive screen image scaling scheme
for the realtime screen applications like remote desktop and screen sharing.
In the proposed screen scaling scheme, a screen content classification step is
first introduced to classify the screen image into text and pictorial regions.
Afterward, we propose an adaptive shift linear interpolation algorithm to
predict the new pixel values with the shift offset adapted to the content type
of each pixel. The shift offset for each screen content type is offline
optimized by minimizing the theoretical interpolation error based on the
training samples respectively. The proposed content adaptive screen image
scaling scheme can achieve good visual quality and also keep the low complexity
for realtime applications.

Metallic nanoparticles embedded in stimuliresponsive polymers can be
regarded as nanoreactors since their catalytic activity can be changed within
wide limits: the physicochemical properties of the polymer network can be tuned
and switched by external parameters, e.g. temperature or pH, and thus allows a
selective control of reactant mobility and concentration close to the reaction
site. Based on a combination of Debye's model of diffusion through an energy
landscape and a twostate model for the polymer, here we develop an analytical
expression for the observed reaction rate constant $k_{\rm obs}$. Our formula
shows an exponential dependence of this rate on the solvation free enthalpy
change $\Delta \bar{G}_{\rm sol}$, a quantity which describes the partitioning
of the reactant in the network versus bulk. Thus, changes in $\Delta
\bar{G}_{\rm sol}$, and not in the diffusion coefficient, will be the decisive
factor affecting the reaction rate in most cases. A comparison with recent
experimental data on switchable, thermosensitive nanoreactors demonstrates the
general validity of the concept.

We report on a strong photoluminescence (PL) enhancement of monolayer MoS2
through defect engineering and oxygen bonding. Micro PL and Raman images
clearly reveal that the PL enhancement occurs at cracks/defects formed during
high temperature vacuum annealing. The PL enhancement at crack/defect sites
could be as high as thousands of times after considering the laser spot size.
The main reasons of such huge PL enhancement include: (1) the oxygen chemical
adsorption induced heavy p doping and the conversion from trion to exciton; (2)
the suppression of nonradiative recombination of excitons at defect sites as
verified by low temperature PL measurements. First principle calculations
reveal a strong binding energy of ~2.395 eV for oxygen molecule adsorbed on an
S vacancy of MoS2. The chemical adsorbed oxygen also provides a much more
effective charge transfer (0.997 electrons per O2) compared to physical
adsorbed oxygen on ideal MoS2 surface. We also demonstrate that the defect
engineering and oxygen bonding could be easily realized by oxygen plasma
irradiation. Xray photoelectron spectroscopy further confirms the formation of
MoO bonding. Our results provide a new route for modulating the optical
properties of two dimensional semiconductors. The strong and stable PL from
defects sites of MoS2 may have promising applications in optoelectronic
devices.

Human activity recognition has wide applications in medical research and
human survey system. In this project, we design a robust activity recognition
system based on a smartphone. The system uses a 3dimentional smartphone
accelerometer as the only sensor to collect time series signals, from which 31
features are generated in both time and frequency domain. Activities are
classified using 4 different passive learning methods, i.e., quadratic
classifier, knearest neighbor algorithm, support vector machine, and
artificial neural networks. Dimensionality reduction is performed through both
feature extraction and subset selection. Besides passive learning, we also
apply active learning algorithms to reduce data labeling expense. Experiment
results show that the classification rate of passive learning reaches 84.4% and
it is robust to common positions and poses of cellphone. The results of active
learning on real data demonstrate a reduction of labeling labor to achieve
comparable performance with passive learning.

Many animal species were verified to use geomagnetic field for their
navigation, but the biophysical mechanism of magnetoreception has remained
enigmatic. This paper presents a special biophysical model that consists of
magnetitebased and radicalpairbased mechanisms for avian magnetoreception.
The amplitude of the resultant magnetic field around the magnetic particles
corresponds to the geomagnetic field direction and affects the yield of
singlet/triplet state products in the radicalpair reactions. Therefore, in the
proposed model, the singlet/triplet state product yields are related to the
geomagnetic field information for orientational detection. The resultant
magnetic fields corresponding to two materials with different magnetic
properties were analyzed under different geomagnetic field directions. The
results showed that ferromagnetic particles in organisms can provide more
significant changes in singlet state products than superparamagnetic particles,
and the period of variation for the singlet state products with an included
angle in the geomagnetic field is approximately 180{\deg} when the magnetic
particles are ferromagnetic materials, consistent with the experimental results
obtained from avian magnetic compass. Further, the calculated results of the
singlet state products in a reception plane showed that the proposed model can
explain the avian magnetoreception mechanism with an inclination compass.

We fabricated thermoresponsive colloidal molecules of ca. 250 nm size.
Electron and scanning force microscopy reveal the dumbbellshaped morphology.
The temperature dependence of the size and aspect ratio (ca. 1.4 to 1.6) is
analyzed by depolarized dynamic light scattering and found to be in good
agreement with microscopic evidence.