• ### Identifying a descriptor for d-orbital delocalization in cathodes of Li batteries based on x-ray Compton scattering(1608.02391)

Aug. 18, 2016 cond-mat.mtrl-sci
We discuss how x-ray Compton scattering spectra can be used for investigating the evolution of electronic states in cathode materials of Li batteries under the lithiation/delithiation process. In particular, our analysis of the Compton spectra taken from polycrystalline LixCoO2 samples shows that the spectra are dominated by the contribution of the O-2p redox orbital. We identify a distinct signature of d-orbital delocalization, which is tied directly to the conductivity of the material, providing a descriptor based on Compton spectra for monitoring the lithiation range with improved conductivity and kinetics for electrochemical operation. Our study demonstrates that Compton scattering spectroscopy can provide a window for probing complex electronic mechanisms underlying the charging and discharging processes in Li-battery materials.
• ### Non-destructive measurement of in-operando lithium concentration in batteries via x-ray Compton scattering(1601.03452)

Non-destructive determination of lithium distribution in a working battery is key for addressing both efficiency and safety issues. Although various techniques have been developed to map the lithium distribution in electrodes, these methods are mostly applicable to test cells. Here we propose the use of high-energy x-ray Compton scattering spectroscopy to measure the local lithium concentration in closed electrochemical cells. A combination of experimental measurements and parallel first-principles computations is used to show that the shape parameter S of the Compton profile is linearly proportional to lithium concentration and thus provides a viable descriptor for this important quantity. The merits and applicability of our method are demonstrated with illustrative examples of LixMn2O4 cathodes and a working commercial lithium coin battery CR2032.
• ### Hedgehog spin texture and competing orders associated with strains on the surface of a topological crystalline insulator(1508.07138)

We have investigated spin reorientation phenomena and interaction driven effects under the presence of applied strains on the (001) surface of Pb$_{1-x}$Sn$_x$(Te, Se) topological crystalline insulators, which host multiple Dirac cones. Our analysis is based on a four-band $k\cdot p$ model, which captures the spin and orbital textures of the surface states at low energies around the $\bar{X}$ and $\bar{Y}$ points, including the Lifshitz transition. Even without breaking the time-reversal symmetry, we find that certain strains which break the mirror symmetry can induce hedgehog-like spin texture associated with gap formation at the Dirac points. The Chern number of the gapped surface ground state is shown to be tunable through the interplay of strains and a perpendicular Zeeman field. We also consider effects of strain in the presence of interactions in driving competing orders, and obtain the associated phase diagram at the mean-field level. Potential applications of our results for low power consuming electronics are discussed.
• ### Extracting the Redox Orbitals in Li Battery Materials with High-Resolution X-Ray Compton Scattering Spectroscopy(1503.00944)

March 3, 2015 cond-mat.mtrl-sci
We present an incisive spectroscopic technique for directly probing redox orbitals based on bulk electron momentum density measurements via high-resolution x-ray Compton scattering. Application of our method to spinel LixMn2O4, a lithium ion battery cathode material, is discussed. The orbital involved in the lithium insertion and extraction process is shown to mainly be the oxygen 2p orbital. Moreover, the manganese 3d states are shown to experience spatial delocalization involving 0.16 electrons per Mn site during the battery operation. Our analysis provides a clear understanding of the fundamental redox process involved in the working of a lithium ion battery.
• ### Nanoscale Determination of the Mass Enhancement Factor in the Lightly-Doped Bulk Insulator Lead Selenide(1502.04694)

Bismuth chalcogenides and lead telluride/selenide alloys exhibit exceptional thermoelectric properties which could be harnessed for power generation and device applications. Since phonons play a significant role in achieving these desired properties, quantifying the interaction between phonons and electrons, which is encoded in the Eliashberg function of a material, is of immense importance. However, its precise extraction has in part been limited due to the lack of local experimental probes. Here we construct a method to directly extract the Eliashberg function using Landau level spectroscopy, and demonstrate its applicability to lightly-doped thermoelectric bulk insulator PbSe. In addition to its high energy resolution only limited by thermal broadening, this novel experimental method could be used to detect variations in mass enhancement factor at the nanoscale. As such, it opens up a new pathway for investigating the effects of chemical defects, surface doping and strain on the mass enhancement factor.
• ### Dirac mass generation from crystal symmetry breaking on the surfaces of topological crystalline insulators(1403.4906)

The tunability of topological surface states (SS) and controllable opening of the Dirac gap are of fundamental and practical interest in the field of topological materials. In topological crystalline insulators (TCIs), a spontaneously generated Dirac gap was recently observed, which was ascribed to broken cubic crystal symmetry. However, this structural distortion has not been directly observed so far, and the microscopic mechanism of Dirac gap opening via crystal symmetry breaking remains elusive. In this work, we present scanning tunneling microscopy (STM) measurements of a TCI Pb$_{1-x}$Sn$_x$Se for a wide range of alloy compositions spanning the topological and non-topological regimes. STM topographies directly reveal a symmetry-breaking distortion on the surface, which imparts mass to the otherwise massless Dirac electrons - a mechanism analogous to the long sought-after Higgs mechanism in particle physics. Remarkably, our measurements show that the Dirac gap scales with alloy composition, while the magnitude of the distortion remains nearly constant. Based on theoretical calculations, we find the Dirac mass is controlled by the composition-dependent SS penetration depth, which determines the weight of SS in the distorted region that is confined to the surface. Finally, we discover the existence of SS in the non-topological regime, which have the characteristics of gapped, double-branched Dirac fermions.
• ### Electronic structure and excitations in oxygen deficient CeO$_{2-\delta}$ from DFT calculations(1403.7650)

The electronic structures of supercells of CeO$_{2-\delta}$ have been calculated within the Density Functional Theory (DFT). The equilibrium properties such as lattice constants, bulk moduli and magnetic moments are well reproduced by the generalized gradient approximation (GGA). Electronic excitations are simulated by robust total energy calculations for constrained states with atomic core- or valence-holes. Pristine ceria CeO$_2$ is found to be a non-magnetic insulator with magnetism setting in as soon as oxygens are removed from the structure. In the ground state of defective ceria, the Ce-$f$ majority band resides near the Fermi level, but appears at about 2 eV below the Fermi level in photoemission spectroscopy experiments due to final state effects. We also tested our computational method by calculating threshold energies in Ce-M$_5$ and O-K x-ray absorption spectroscopy and comparing theoretical predictions with the corresponding measurements. Our result that $f$ electrons reside near the Fermi level in the ground state of oxygen deficient ceria is crucial for understanding catalytic properties of CeO$_2$ and related materials.
• ### Observation of Dirac node formation and mass acquisition in a topological crystalline insulator(1305.2823)

In the recently discovered topological crystalline insulators (TCIs), topology and crystal symmetry intertwine to create surface states with a unique set of characteristics. Among the theoretical predictions for TCIs is the possibility of imparting mass to the massless Dirac fermions by breaking crystal symmetry, as well as a Lifshitz transition with a change of Fermi surface topology. Here we report high resolution scanning tunneling microscopy studies of a TCI, Pb1-xSnxSe. We demonstrate the formation of zero mass Dirac fermions protected by crystal symmetry and the mechanism of mass generation via symmetry breaking, which constitute the defining characteristics of TCIs. In addition, we show two distinct regimes of fermiology separated by a Van-Hove singularity at the Lifshitz transition point. Our work paves the way for engineering the Dirac band gap and realizing interaction-driven topological quantum phenomena in TCIs.
• ### Non-trivial spin-texture of the coaxial Dirac cones on the surface of topological crystalline insulator SnTe(1304.8119)

We present first principles calculations of the nontrivial surface states and their spin-textures in the topological crystalline insulator SnTe. The surface state dispersion on the [001] surface exhibits four Dirac-cones centered along the intersection of the mirror plane and the surface plane. We propose a simple model of two interacting coaxial Dirac cones to describe both the surface state dispersion and the associated spin-texture. While the out-of-the-plane spin polarization is zero due to the crystalline and time-reversal symmetries, the in-plane spin texture shows helicity with some distortion due to the interaction of the two coaxial Dirac cones, indicating a nontrivial mirror Chern number of -2, distinct from the value of -1 in $Z_{2}$ topological insulator such as Bi/Sb alloys or Bi$_2$Se$_3$. The surface state dispersion and its spin-texture would provide an experimentally accessible way to determine the nontrivial mirror Chern number.
• ### Reversal of the circular dichroism in the angle-resolved photoemission from Bi2Te3(1303.6161)

The helical Dirac fermions at the surface of topological insulators show a strong circular dichroism which has been explained as being due to either the initial-state spin angular momentum, the initial-state orbital angular momentum, or the handedness of the experimental setup. All of these interpretations conflict with our data from Bi2Te3 which depend on the photon energy and show several sign changes. Our one-step photoemission calculations coupled to ab initio theory confirm the sign change and assign the dichroism to a final-state effect. The spin polarization of the photoelectrons, instead, remains a reliable probe for the spin in the initial state.
• ### Adiabatic transformation as a search tool for new topological insulators: distorted ternary Li$_2$AgSb-class semiconductors and related compounds(1303.2228)

March 9, 2013 cond-mat.mtrl-sci
We demonstrate that first-principles based adiabatic continuation approach is a very powerful and efficient tool for constructing topological phase diagrams and locating non-trivial topological insulator materials. Using this technique, we predict that the ternary intermetallic series Li$_2M'X$ where $M'$=Cu, Ag, Au, or Cd, and $X$=Sb, Bi, or Sn, hosts a number of topological insulators with remarkable functional variants and tunability. We also predict that several III-V semimetallic compounds are topologically non-trivial. We construct a topological phase diagram in the parameter space of the atomic numbers of atoms in Li$_2M'X$ compounds, which places a large number of topological materials presented in this work as well as in earlier studies within a single unified topological framework. Our results demonstrate the efficacy of adiabatic continuation as a useful tool for exploring topologically nontrivial alloying systems and for identifying new topological insulators even when the underlying lattice does not possess inversion symmetry, and the approaches based on parity analysis are not viable.
• ### Lindhard and RPA susceptibility computations in extended momentum space in electron doped cuprates(1208.3210)

Aug. 15, 2012 cond-mat.str-el
We present an approximation for efficient calculation of the Lindhard susceptibility $\chi^{L}(q,\omega)$ in a periodic system through the use of simple products of real space functions and the fast Fourier transform (FFT). The method is illustrated by providing $\chi^{L}(q,\omega)$ results for the electron doped cuprate Nd$_{2-x}$Ce$_{x}$CuO$_{4}$ extended over several Brillouin zones. These results are relevant for interpreting inelastic X-ray scattering spectra from cuprates.
• ### Bulk Fermi surface and momentum density in heavily doped La$_{2-x}$Sr$_x$CuO$_4$ using high resolution Compton scattering and positron annihilation spectroscopies(1203.2865)

We have observed the bulk Fermi surface (FS) in an overdoped ($x$=0.3) single crystal of La$_{2-x}$Sr$_x$CuO$_4$ by using Compton scattering. A two-dimensional (2D) momentum density reconstruction from measured Compton profiles yields a clear FS signature in the third Brillouin zone along [100]. The quantitative agreement between density functional theory (DFT) calculations and momentum density experiment suggests that Fermi-liquid physics is restored in the overdoped regime. In particular the predicted FS topology is found to be in good accord with the corresponding experimental data. We find similar quantitative agreement between the measured 2D angular correlation of positron annihilation radiation (2D-ACAR) spectra and the DFT based computations. However, 2D-ACAR does not give such a clear signature of the FS in the extended momentum space in either the theory or the experiment.
• ### Proposal to determine the Fermi-surface topology of a doped iron-based superconductor using bulk-sensitive Fourier-transform Compton scattering(1002.1483)

We have carried out first-principles calculations of the Compton scattering spectra to demonstrate that the filling of the hole Fermi surface in LaO$_{1-x}$F$_{x}$FeAs produces a distinct signature in the Fourier transformed Compton spectrum when the momentum transfer vector lies along the [100] direction. We thus show how the critical concentration $x_c$, where hole Fermi surface pieces are filled up and the superconductivity mediated by antiferromagnetic spin fluctuations is expected to be suppressed, can be obtained in a bulk-sensitive manner.